Forum Linux.mandriva bureau plus grand que l'ecran

Posté par  .
Étiquettes : aucune
0
20
avr.
2006
bonjours a tous
depuis son instalation ma mandriva 2006 m'affiche un bureau bien plus grand que la taille de l'ecran dont la definision n'est modifiable que en 640X480 ou en 800X600 (dans configuration KDE-Periferique-ecran)alors que dans configuration de mon ordinateur-materiel-ecran la j'ai toute les definisions posibles.
Mon ecran est un hitachi CM615 il est quant as luis bloqué sur 640X480 60hrz et n'en change pas meme si l'ont change la definision par les parametres expliqué au debut du post
la carte graphique est une S3 UNICHROME
apres avoir fouillé un peut partout sur le net est sur ce forum j'ai trouver des pistes en modifiant le xorg.conf mais toute ses manipulation sont restés vaine.je vous fait une copie de ce fichier dont je pense que vienne tous mes soucis.
merci de votre aide


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable (server abort)
#DontZoom # disable <KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "monitor1"
HorizSync 31-70
VertRefresh 50-99

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "1000x768" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "1024x768" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "VIA Technologies Inc"
BoardName "S3 UniChrome"
Driver "via"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 15
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 16
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 24
Virtual 800 600
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection

  • # déjà posé

    Posté par  (site web personnel) . Évalué à 2.

    cf http://linuxfr.org/forums/14/16215.html

  • # Essais avec ca peut etre

    Posté par  . Évalué à 1.

    # File generated by XFdrake.

    # **********************************************************************
    # Refer to the XF86Config man page for details about the format of
    # this file.
    # **********************************************************************

    Section "Files"
    # Multiple FontPath entries are allowed (they are concatenated together)
    # By default, Mandrake 6.0 and later now use a font server independent of
    # the X server to render fonts.
    FontPath "unix/:-1"
    EndSection

    Section "ServerFlags"
    #DontZap # disable (server abort)
    #DontZoom # disable <KP_+>/<KP_-> (resolution switching)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    EndSection

    Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx" # 3D layer
    Load "dri" # direct rendering
    EndSection

    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "keyboard"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
    Option "XkbOptions" "compose:rwin"
    EndSection

    Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/mouse"
    Option "ZAxisMapping" "6 7"
    EndSection

    Section "Monitor"
    Identifier "monitor1"
    HorizSync 31-70
    VertRefresh 50-99

    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "1000x768" 50.00 768 832 846 1000 576 590 595 630

    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "1024x768" 63.07 768 800 960 1024 576 578 590 616
    EndSection

    Section "Device"
    Identifier "device1"
    VendorName "VIA Technologies Inc"
    BoardName "S3 UniChrome"
    Driver "via"
    Option "DPMS"
    EndSection

    Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24

    Subsection "Display"
    Depth 8
    Virtual 800 600
    EndSubsection

    Subsection "Display"
    Depth 15
    Virtual 800 600
    EndSubsection

    Subsection "Display"
    Depth 16
    Virtual 800 600
    EndSubsection

    Subsection "Display"
    Depth 24
    Mode "1024x768"
    EndSubsection
    EndSection

    Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    Screen "screen1"
    EndSection

    • [^] # oups

      Posté par  . Évalué à 1.

      Modes "1024x768"

      • [^] # Re: oups

        Posté par  . Évalué à 1.

        j'ai deja essayé mais ca marche pas mieux

        • [^] # Re: oups

          Posté par  . Évalué à 2.

          Y'a une faute dans la directive
          HorizSync 31-70
          D'après la doc (http://www.hitachiserviceeu.com/scripts/userguide.php/CM615E(...) il est indiqué page 10 : HorizSync 30-70
          Peut-être que ça vient de là ?

          • [^] # Re: oups

            Posté par  . Évalué à 1.

            je vien de changer le parametre et meme resultat je vous communique le xorg.conf tel qu'il est acctuelement

            # File generated by XFdrake.

            # **********************************************************************
            # Refer to the XF86Config man page for details about the format of
            # this file.
            # **********************************************************************

            Section "Files"
            # Multiple FontPath entries are allowed (they are concatenated together)
            # By default, Mandrake 6.0 and later now use a font server independent of
            # the X server to render fonts.
            FontPath "unix/:-1"
            EndSection

            Section "ServerFlags"
            #DontZap # disable (server abort)
            #DontZoom # disable <KP_+>/<KP_-> (resolution switching)
            AllowMouseOpenFail # allows the server to start up even if the mouse does not work
            EndSection

            Section "Module"
            Load "dbe" # Double-Buffering Extension
            Load "v4l" # Video for Linux
            Load "extmod"
            Load "type1"
            Load "freetype"
            Load "glx" # 3D layer
            Load "dri" # direct rendering
            EndSection

            Section "InputDevice"
            Identifier "Keyboard1"
            Driver "keyboard"
            Option "XkbModel" "pc105"
            Option "XkbLayout" "fr"
            Option "XkbOptions" "compose:rwin"
            EndSection

            Section "InputDevice"
            Identifier "Mouse1"
            Driver "mouse"
            Option "Protocol" "ExplorerPS/2"
            Option "Device" "/dev/mouse"
            Option "ZAxisMapping" "6 7"
            EndSection

            Section "Monitor"
            Identifier "monitor1"
            VendorName "Hitachi, Ltd."
            ModelName "Hitachi CM615"
            HorizSync 30-70
            VertRefresh 50-160

            # TV fullscreen mode or DVD fullscreen output.
            # 768x576 @ 79 Hz, 50 kHz hsync
            ModeLine "1000x768" 50.00 768 832 846 1000 576 590 595 630

            # 768x576 @ 100 Hz, 61.6 kHz hsync
            ModeLine "1024x768" 63.07 768 800 960 1024 576 578 590 616
            EndSection

            Section "Device"
            Identifier "device1"
            VendorName "VIA Technologies Inc"
            BoardName "S3 UniChrome"
            Driver "via"
            Option "DPMS"
            EndSection

            Section "Screen"
            Identifier "screen1"
            Device "device1"
            Monitor "monitor1"
            DefaultColorDepth 24

            Subsection "Display"
            Depth 8
            Modes "1024x768"
            EndSubsection

            Subsection "Display"
            Depth 15
            Modes "1024x768"
            EndSubsection

            Subsection "Display"
            Depth 16
            Modes "1024x768"
            EndSubsection

            Subsection "Display"
            Depth 24
            Modes "1024x768" "800x600" "640x480"
            EndSubsection
            EndSection

            Section "ServerLayout"
            Identifier "layout1"
            InputDevice "Keyboard1" "CoreKeyboard"
            InputDevice "Mouse1" "CorePointer"
            Screen "screen1"
            EndSection

            • [^] # Re: oups

              Posté par  . Évalué à 1.

              essaie en changeant

              Section "Monitor"
              Identifier "monitor1"
              VendorName "Hitachi, Ltd."
              ModelName "Hitachi CM615"
              HorizSync 30-70
              VertRefresh 50-160

              # TV fullscreen mode or DVD fullscreen output.
              # 768x576 @ 79 Hz, 50 kHz hsync
              ModeLine "1000x768" 50.00 768 832 846 1000 576 590 595 630

              # 768x576 @ 100 Hz, 61.6 kHz hsync
              ModeLine "1024x768" 63.07 768 800 960 1024 576 578 590 616
              EndSection


              en

              Section "Monitor"
              Identifier "monitor1"
              VendorName "Hitachi, Ltd."
              ModelName "Hitachi CM615"
              #HorizSync 30-70
              #VertRefresh 50-160

              # TV fullscreen mode or DVD fullscreen output.
              # 768x576 @ 79 Hz, 50 kHz hsync
              #ModeLine "1000x768" 50.00 768 832 846 1000 576 590 595 630

              # 768x576 @ 100 Hz, 61.6 kHz hsync
              #ModeLine "1024x768" 63.07 768 800 960 1024 576 578 590 616
              EndSection

              histoire de ne pas forcer les tailles et frequences du bureau.

              tu peux aussi ajouter
              Option "DDC"
              pour tenter de forcer l'autodetection.

              à suivre.

              • [^] # Re: oups

                Posté par  . Évalué à 1.

                aucun changement apres ses modifs mon ecran reste malheureusement sur 640x480 60Hz (dans configuration KDE Périferique Affichage) et aucun autre choix met proposé dans le menu deroulant
                alors que pour configuration ;configuration de mon ordinateur ;materiel;ecran la ma carte graphique (S3 UNICHROME) me propose tous les resolutions posible du 640x480 au 1600x1400 mais quant j'effectue un changement as ce niveau il ne ce passe plus le probleme de taille du bureau plus grand que l'ecran mais il me demande de me reloguer ce que j'effectue et la il reste en 640x480(alors que les parametre de la carte graph indique la resolution que j'ai demander 1024x768)
                voili voila

            • [^] # Re: oups

              Posté par  . Évalué à 0.

              Remplace

              Subsection "Display"
              Depth 24
              Modes "1024x768" "800x600" "640x480"
              EndSubsection

              par

              Subsection "Display"
              Depth 24
              Modes "640x480"
              EndSubsection

              Et ça devrait fonctionner

              • [^] # Re: oups

                Posté par  . Évalué à 2.

                pour mettre le bureau en 640x480 ca me semble ideal
                mais je ne penses pas qu'il veuille faire cela.

  • # Logs de Xorg?

    Posté par  . Évalué à 1.

    Jette-un oeil au fichier de logs: /var/log/Xorg.0.log chez moi. Et cherche des "warning" (WW) ou "Errors" (EE).
    Bon courrage

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.