Bonjour, suite a un soucis avec Windows 10 que je ne peux plus lancer sur mon ordinateur. J'ai donc décidé de me tourner vers Linux et plus particulièrement Zorin.
Malheureusement, lorsque je veux passé a l'installation, j'ai ce message d'erreur : " partitions 2, 4 have been written, but we have been unable to inform the kernel of the change, probable because it are in use. As the result, the old partitions will remains in use. You should reboot now before making further changes ", j'ai donc fait des recherches avant de passer par ce forum qui n'ont pas été concluantes.
Je joint ici un Boot-info afin que vous ayez plus d'info. Merci d'avance
Cordialement
Boot-info
oot-info-4ppa203 [20230615_1639]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system:
Boot sector type: Unknown
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.04
Boot sector info: Syslinux looks at sector 58762 of /dev/sdb1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/efi/boot/bootia32.efi /efi/boot/bootx64.efi
/efi/boot/grubx64.efi /efi/boot/mmx64.efi /ldlinux.sys
================================ 0 OS detected =================================
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Graphics Controller from Intel Corporation
Live-session OS is Zorin 64-bit (Zorin OS 16.2, focal, x86_64)
===================================== UEFI =====================================
BIOS/UEFI firmware: E502NA.303(5.12) from American Megatrends Inc.
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.
SecureBoot enabled.
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0000,0001
Boot0000* Windows Boot Manager HD(2,GPT,b38c7a91-27e4-4df6-ae6e-5f14cd5201b3,0xfa000,0x32000)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* UEFI: SanDisk, Partition 1 PciRoot(0x0)/Pci(0x15,0x0)/USB(10,0)/HD(1,MBR,0x294648,0x800,0xe537800)..BO
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, no-os, no-wind, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk sda: 223.58 GiB, 240057409536 bytes, 468862128 sectors
Disk identifier: D029E77E-CD98-47B8-82ED-4C1877F4E29E
Start End Sectors Size Type
sda1 2048 1050623 1048576 512M EFI System
sda2 1050624 468860927 467810304 223.1G Linux filesystem
Disk sdb: 114.62 GiB, 123060879360 bytes, 240353280 sectors
Disk identifier: 0x00294648
Boot Start End Sectors Size Id Type
sdb1 * 2048 240353279 240351232 114.6G c W95 FAT32 (LBA)
parted -lm (filtered): _________________________________________________________
sda:240GB:scsi:512:4096:gpt:ATA KINGSTON SUV5002:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:240GB:240GB:::;
sdb:123GB:scsi:512:512:msdos:SanDisk Ultra:;
1:1049kB:123GB:123GB:fat32::boot, lba;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat 5FCA-859E d31c788b-33e0-44e6-a85e-b9427479688b EFI System Partition
└─sda4 ntfs 9A5059AE505991BD
sdb
└─sdb1 vfat 16FD-196B 00294648-01 ZORIN OS 16
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/sda1 511M 0% /mnt/boot-sav/sda1
/dev/sdb1 111.7G 3% /cdrom
Mount options (filtered): ______________________________________________________
====================== sdb1/boot/grub/grub.cfg (filtered) ======================
Try or Install Zorin OS
Try or Install Zorin OS (safe graphics)
Try or Install Zorin OS (modern NVIDIA drivers)
UEFI Firmware Settings
Power Off
========================= sdb1/syslinux.cfg (filtered) =========================
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
==================== sdb1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================== sdb1: Location of files loaded by Syslinux ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
======================== Unknown MBRs/Boot Sectors/etc =========================
Unknown BootLoader on sda2
mount -t ntfs-3g -o remove_hiberfile /dev/sda4 /mnt/boot-sav/sda4
mount -t ntfs-3g -o remove_hiberfile /dev/sda4 /mnt/boot-sav/sda4
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would not act on the boot.
# Huuu
Posté par GG (site web personnel) . Évalué à 3.
Bonjour,
est ce que tu as rebooté et essayé de refaire une installation à nouveau?
Pourquoi avoir choisi Zorin comme distribution Linux? C'est juste par curiosité.
Pourquoi bloquer la publicité et les traqueurs : https://greboca.com/Pourquoi-bloquer-la-publicite-et-les-traqueurs.html
Suivre le flux des commentaires
Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.