Forum Linux.général Mon lecteur mp3 ne fonctionne plus bien

Posté par  .
Étiquettes : aucune
0
18
oct.
2010
Bonjour,

La connection a mon lecteur mp3 ne fonctionne plus bien. Il s'agit d'un SANSA CLIP.
Je l'ai finalement reformatté, mais il ne démarre pas à la connexion.

dmesg | tail -50


manuel@ubuntu:~$ sudo mount /dev/usbmon2 /mnt/SANSA/
mount : /dev/usbmon2 n'est pas un périphérique de type bloc
manuel@ubuntu:~$ sudo mount /dev/sd /mnt/SANSA/
sda sda1 sda2 sda5 sdb sdc sdc1 sdc2
manuel@ubuntu:~$ sudo mount /dev/scd0 /mnt/SANSA/
scd0
manuel@ubuntu:~$ sudo mount /dev/scd0 /mnt/SANSA/
mount : /dev/sr0 : périphérique inconnnu
manuel@ubuntu:~$ dmesg | tail -15
[50803.152533] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50803.964039] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50810.476040] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50811.000049] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50811.896058] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50812.341730] scsi 9:0:0:0: Device offlined - not ready after error recovery
[51414.253794] sd 6:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[51414.254536] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[51414.256284] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[51414.256293] sdb: sdb1
[51418.644562] Skipping EDID probe due to cached edid
[51985.737638] usb 2-1: USB disconnect, address 9
[51997.604332] hub 2-0:1.0: unable to enumerate USB device on port 1
[51999.524043] usb 2-1: new high speed USB device using ehci_hcd and address 11
[51999.662074] scsi10 : usb-storage 2-1:1.0
manuel@ubuntu:~$ sudo mount /dev/sdb1 /mnt/SANSA/
mount : le périphérique spécial /dev/sdb1 n'existe pas
manuel@ubuntu:~$ dmesg | tail -50
[45594.876546] Skipping EDID probe due to cached edid
[49723.352066] Skipping EDID probe due to cached edid
[50664.088571] usb 6-1: USB disconnect, address 2
[50700.268537] hub 2-0:1.0: unable to enumerate USB device on port 1
[50701.924037] usb 2-1: new high speed USB device using ehci_hcd and address 6
[50702.060250] scsi8 : usb-storage 2-1:1.0
[50703.064732] scsi 8:0:0:0: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0
[50703.065402] scsi 8:0:0:1: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0
[50703.066026] sd 8:0:0:0: Attached scsi generic sg4 type 0
[50703.066247] sd 8:0:0:1: Attached scsi generic sg5 type 0
[50703.089160] sd 8:0:0:0: [sdd] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB)
[50703.089863] sd 8:0:0:0: [sdd] Write Protect is off
[50703.089869] sd 8:0:0:0: [sdd] Mode Sense: 04 00 00 00
[50703.089873] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[50703.093994] sd 8:0:0:1: [sde] Attached SCSI removable disk
[50703.095483] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[50703.095496] sdd:
[50703.103927] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[50703.103935] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[50721.953281] usb 2-1: USB disconnect, address 6
[50724.352554] usb 6-1: new low speed USB device using uhci_hcd and address 3
[50724.663801] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input14
[50724.663940] generic-usb 0003:04D9:1603.0004: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1/input0
[50724.756230] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input15
[50724.756376] generic-usb 0003:04D9:1603.0005: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1/input1
[50764.528065] usb 6-1: USB disconnect, address 3
[50778.812879] hub 2-0:1.0: unable to enumerate USB device on port 1
[50780.728542] usb 2-1: new high speed USB device using ehci_hcd and address 9
[50780.864230] scsi9 : usb-storage 2-1:1.0
[50803.152533] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50803.964039] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50810.476040] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50811.000049] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50811.896058] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[50812.341730] scsi 9:0:0:0: Device offlined - not ready after error recovery
[51414.253794] sd 6:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[51414.254536] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[51414.256284] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[51414.256293] sdb: sdb1
[51418.644562] Skipping EDID probe due to cached edid
[51985.737638] usb 2-1: USB disconnect, address 9
[51997.604332] hub 2-0:1.0: unable to enumerate USB device on port 1
[51999.524043] usb 2-1: new high speed USB device using ehci_hcd and address 11
[51999.662074] scsi10 : usb-storage 2-1:1.0
[52022.160040] usb 2-1: reset high speed USB device using ehci_hcd and address 11
[52022.976053] usb 2-1: reset high speed USB device using ehci_hcd and address 11
[52029.504804] usb 2-1: reset high speed USB device using ehci_hcd and address 11
[52030.028037] usb 2-1: reset high speed USB device using ehci_hcd and address 11
[52030.984040] usb 2-1: reset high speed USB device using ehci_hcd and address 11
[52031.384953] scsi 10:0:0:0: Device offlined - not ready after error recovery

  • # Ok j'ai trouvé la solution

    Posté par  . Évalué à 2.

    Il s'agissait d'un paramètre "mode usb". Mis en "auto" après le formatage, je l'ai remis en MTP je crois.

    • [^] # Re: Ok j'ai trouvé la solution

      Posté par  . Évalué à 2.

      Donc en gros il ne fonctionne pas en storage?

      ⚓ À g'Auch TOUTE! http://afdgauch.online.fr

      • [^] # Re: Ok j'ai trouvé la solution

        Posté par  . Évalué à 1.

        Non il fonctionne en "msc" je ne sais pas ce que c'est mais il fonctionne très bien avec Linux comme ça.

        • [^] # Re: Ok j'ai trouvé la solution

          Posté par  . Évalué à 2.

          C'est un format qui ne permet pas de mettre ce qu'on veut dans le support. C'est censé peupler les listes de lecture plus efficacement...

          ⚓ À g'Auch TOUTE! http://afdgauch.online.fr

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.