Forum Linux.debian/ubuntu Ubuntu long to start

Posté par  . Licence CC By‑SA.
0
7
fév.
2021

Bonjour à tous,
Mon Ubuntu est long a démarrer, et ce depuis que je l'ai installé.
Rapport dmesg:

[    0.276979] TCP: Hash tables configured (established 65536 bind 65536)
[    0.277009] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.277031] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.277070] NET: Registered protocol family 1
[    0.277075] NET: Registered protocol family 44
[    0.277085] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.277352] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.277356] PCI: CLS 0 bytes, default 64
[    0.277388] Trying to unpack rootfs image as initramfs...
[    0.387888] Freeing initrd memory: 48860K
[    0.387905] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.387907] software IO TLB: mapped [mem 0x75aa5000-0x79aa5000] (64MB)
[    0.388096] check: Scanning for low memory corruption every 60 seconds
[    0.388535] Initialise system trusted keyrings
[    0.388547] Key type blacklist registered
[    0.388590] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.389652] zbud: loaded
[    0.389954] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.390088] fuse: init (API version 7.31)
[    0.390103] *** VALIDATE fuse ***
[    0.390105] *** VALIDATE fuse ***
[    0.390213] Platform Keyring initialized
[    0.393005] Key type asymmetric registered
[    0.393007] Asymmetric key parser 'x509' registered
[    0.393013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.393040] io scheduler mq-deadline registered
[    0.393327] pcieport 0000:00:01.0: PME: Signaling with IRQ 120
[    0.393489] pcieport 0000:00:1c.0: PME: Signaling with IRQ 121
[    0.393527] pcieport 0000:00:1c.0: AER: enabled with IRQ 121
[    0.393696] pcieport 0000:00:1c.3: PME: Signaling with IRQ 122
[    0.393735] pcieport 0000:00:1c.3: AER: enabled with IRQ 122
[    0.393784] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.393824] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.393826] vesafb: scrolling: redraw
[    0.393828] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.393843] vesafb: framebuffer at 0xb0000000, mapped to 0x00000000edbc4840, using 8128k, total 8128k
[    0.393906] Console: switching to colour frame buffer device 240x67
[    0.541915] fb0: VESA VGA frame buffer device
[    0.542384] intel_idle: MWAIT substates: 0x11142120
[    0.542384] intel_idle: v0.4.1 model 0x5E
[    0.542387] intel_idle: state C8 is disabled
[    0.542388] intel_idle: state C9 is disabled
[    0.542652] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.543232] ACPI: AC Adapter [ADP1] (off-line)
[    0.543749] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:01/PNP0C0D:00/input/input0
[    0.544990] ACPI: Lid Switch [LID0]
[    0.545396] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.546267] ACPI: Sleep Button [SLPB]
[    0.546662] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.547532] ACPI: Power Button [PWRB]
[    0.547929] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.548783] ACPI: Power Button [PWRF]
[    0.551065] thermal LNXTHERM:00: registered as thermal_zone0
[    0.551663] ACPI: Thermal Zone [THRM] (31 C)
[    0.552573] thermal LNXTHERM:01: registered as thermal_zone1
[    0.553156] ACPI: Thermal Zone [TZ00] (28 C)
[    0.553739] thermal LNXTHERM:02: registered as thermal_zone2
[    0.554321] ACPI: Thermal Zone [TZ01] (30 C)
[    0.555036] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.558500] Linux agpgart interface v0.103
[    0.564229] loop: module loaded
[    0.564831] libphy: Fixed MDIO Bus: probed
[    0.565253] tun: Universal TUN/TAP device driver, 1.6
[    0.565814] PPP generic driver version 2.4.2
[    0.566356] VFIO - User Level meta-driver version: 0.3
[    0.567001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.567675] ehci-pci: EHCI PCI platform driver
[    0.568138] ehci-platform: EHCI generic platform driver
[    0.568736] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.569405] ohci-pci: OHCI PCI platform driver
[    0.569867] ohci-platform: OHCI generic platform driver
[    0.570410] uhci_hcd: USB Universal Host Controller Interface driver
[    0.571199] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.571741] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.573611] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    0.574703] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.575540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.576445] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.577187] usb usb1: Product: xHCI Host Controller
[    0.577692] usb usb1: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
[    0.578335] usb usb1: SerialNumber: 0000:00:14.0
[    0.578923] hub 1-0:1.0: USB hub found
[    0.579323] hub 1-0:1.0: 16 ports detected
[    0.581096] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.613283] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.645670] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.677857] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.710542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.743220] usb usb2: Product: xHCI Host Controller
[    0.775808] usb usb2: Manufacturer: Linux 5.4.0-65-generic xhci-hcd
[    0.808980] usb usb2: SerialNumber: 0000:00:14.0
[    0.842197] hub 2-0:1.0: USB hub found
[    0.875311] hub 2-0:1.0: 8 ports detected
[    0.909005] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.946703] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.979945] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.013090] mousedev: PS/2 mouse device common for all mice
[    1.046483] rtc_cmos 00:04: RTC can wake from S4
[    1.080546] rtc_cmos 00:04: registered as rtc0
[    1.113832] hpet: Lost 1 RTC interrupts
[    1.147202] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.181291] i2c /dev entries driver
[    1.214959] device-mapper: uevent: version 1.0.3
[    1.216459] battery: ACPI: Battery Slot [BAT1] (battery present)
[    1.250699] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.320522] platform eisa.0: Probing EISA bus 0
[    1.354827] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.354829] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.391160] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.462562] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.496935] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.530324] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.562725] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.594634] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.625693] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.648353] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[    1.656620] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.718296] platform eisa.0: EISA: Detected 0 cards
[    1.747967] intel_pstate: Intel P-state driver initializing
[    1.778187] intel_pstate: HWP enabled
[    1.808142] ledtrig-cpu: registered to indicate activity on CPUs
[    1.837883] intel_pmc_core INT33A1:00:  initialized
[    1.838786] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00, bcdDevice= 1.10
[    1.868878] drop_monitor: Initializing network drop monitor service
[    1.900450] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[    1.933043] NET: Registered protocol family 10
[    1.965715] usb 1-7: Product: MSI EPF USB
[    1.998386] tsc: Refined TSC clocksource calibration: 2303.999 MHz
[    2.004006] Segment Routing with IPv6
[    2.004027] NET: Registered protocol family 17
[    2.004055] Key type dns_resolver registered
[    2.030998] usb 1-7: Manufacturer: MSI EPF USB
[    2.030999] usb 1-7: SerialNumber: MSI EPF USB
[    2.156375] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    2.185431] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f6faae8, max_idle_ns: 440795313647 ns
[    2.278290] clocksource: Switched to clocksource tsc
[    2.278774] RAS: Correctable Errors collector initialized.
[    2.341821] microcode: sig=0x506e3, pf=0x20, revision=0xe2
[    2.365413] usb 1-10: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    2.375109] microcode: Microcode Update Driver: v2.2.
[    2.375113] IPI shorthand broadcast: enabled
[    2.407836] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.501052] sched_clock: Marking stable (2500197665, 847410)->(2506642171, -5597096)
[    2.532221] registered taskstats version 1
[    2.536348] usb 1-12: new high-speed USB device number 4 using xhci_hcd
[    2.564625] Loading compiled-in X.509 certificates
[    2.629574] Loaded X.509 cert 'Build time autogenerated kernel key: 254611168742f91faa32f8ad6a92fc903145caeb'
[    2.661729] zswap: loaded using pool lzo/zbud
[    2.694110] Key type ._fscrypt registered
[    2.726396] Key type .fscrypt registered
[    2.744681] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    2.765429] Key type big_key registered
[    2.794941] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.832144] Key type encrypted registered
[    2.864289] usb 1-12: Product: USB2.0-CRW
[    2.864290] usb 1-12: Manufacturer: Generic
[    2.864291] usb 1-12: SerialNumber: 20100201396000000
[    2.994425] AppArmor: AppArmor sha1 policy hashing enabled
[    3.026811] ima: No TPM chip found, activating TPM-bypass!
[    3.059595] ima: Allocated hash algorithm: sha1
[    3.091822] ima: No architecture policies found
[    3.123737] evm: Initialising EVM extended attributes:
[    3.156059] evm: security.selinux
[    3.188043] evm: security.SMACK64
[    3.219702] evm: security.SMACK64EXEC
[    3.251264] evm: security.SMACK64TRANSMUTE
[    3.282639] evm: security.SMACK64MMAP
[    3.313513] evm: security.apparmor
[    3.343896] evm: security.ima
[    3.374052] evm: security.capability
[    3.403928] evm: HMAC attrs: 0x1
[    3.434300] PM:   Magic number: 9:476:773
[    3.463279] hub 2-0:1.0: hash matches
[    3.492486] rtc_cmos 00:04: setting system clock to 2021-02-07T07:45:20 UTC (1612683920)
[    3.522809] Freeing unused decrypted memory: 2040K
[    3.552131] Freeing unused kernel image memory: 2724K
[    3.596391] Write protecting the kernel read-only data: 22528k
[    3.626411] Freeing unused kernel image memory: 2008K
[    3.656524] Freeing unused kernel image memory: 1184K
[    3.694363] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.724496] x86/mm: Checking user space page tables
[    3.763075] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.793440] Run /init as init process
[    4.105198] hidraw: raw HID events driver (C) Jiri Kosina
[    4.139731] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.154035] usbcore: registered new interface driver rtsx_usb
[    4.236736] ahci 0000:00:17.0: version 3.0
[    4.238367] usbcore: registered new interface driver usbhid
[    4.247097] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    4.247543] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:f1:a6:d8]
[    4.271808] usbhid: USB HID core driver
[    4.370956] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    4.405347] alx 0000:03:00.0 enp3s0: renamed from eth0
[    4.441305] scsi host0: ahci
[    4.471957] scsi host1: ahci
[    4.502514] scsi host2: ahci
[    4.535540] scsi host3: ahci
[    4.565397] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 124
[    4.596125] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 124
[    4.626487] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 124
[    4.655990] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 124
[    4.999981] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.031993] ata2: SATA link down (SStatus 4 SControl 300)
[    5.042569] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[    5.064009] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.122124] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.152533] ata3.00: ATAPI: TSSTcorp CDDVDW SU-208GB, TM00, max UDMA/100
[    5.182232] ata1.00: ATA-9: TOSHIBA THNSNJ128G8NY, JYXA0101, max UDMA/100
[    5.205184] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400/0x0, board id: 1474, fw id: 793787
[    5.213524] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.278410] ata4.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[    5.282051] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.311057] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.311761] ata1.00: configured for UDMA/100
[    5.405065] ahci 0000:00:17.0: port does not support device sleep
[    5.435359] ata3.00: configured for UDMA/100
[    5.435601] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA THNSNJ12 0101 PQ: 0 ANSI: 5
[    5.465927] ata4.00: configured for UDMA/133
[    5.497724] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    5.528919] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.559772] sd 0:0:0:0: [sda] Write Protect is off
[    5.592712] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SU-208GB  TM00 PQ: 0 ANSI: 5
[    5.621181] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.621189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.698135]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    5.729257] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.773421] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.803766] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.848747] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    5.848999] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    5.880240] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[    5.912031] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    5.912035] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    5.977929] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    6.010174] sd 3:0:0:0: [sdb] Write Protect is off
[    6.042470] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    6.042477] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.461169]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    6.495153] sd 3:0:0:0: [sdb] Attached SCSI disk
[    7.747070] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    9.917809] systemd[1]: Inserted module 'autofs4'
[   10.142309] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   10.236499] systemd[1]: Detected architecture x86-64.
[   10.469587] systemd[1]: Set hostname to <Gogoud-GE62>.
[   13.276129] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[   13.924366] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
[   14.180445] systemd[1]: Created slice system-modprobe.slice.
[   14.264019] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   14.349846] systemd[1]: Created slice User and Session Slice.
[   14.436468] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.525959] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   14.617787] systemd[1]: Reached target User and Group Name Lookups.
[   14.709458] systemd[1]: Reached target Remote File Systems.
[   14.801796] systemd[1]: Reached target Slices.
[   14.893311] systemd[1]: Listening on Syslog Socket.
[   14.982571] systemd[1]: Listening on fsck to fsckd communication Socket.
[   15.071985] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   15.161710] systemd[1]: Listening on Journal Audit Socket.
[   15.251460] systemd[1]: Listening on Journal Socket (/dev/log).
[   15.341162] systemd[1]: Listening on Journal Socket.
[   15.430650] systemd[1]: Listening on udev Control Socket.
[   15.520298] systemd[1]: Listening on udev Kernel Socket.
[   15.609752] systemd[1]: Mounting Huge Pages File System...
[   15.699785] systemd[1]: Mounting POSIX Message Queue File System...
[   15.790310] systemd[1]: Mounting Kernel Debug File System...
[   15.880295] systemd[1]: Mounting Kernel Trace File System...
[   15.971531] systemd[1]: Starting Journal Service...
[   16.067437] systemd[1]: Starting Set the console keyboard layout...
[   16.158568] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   16.251576] systemd[1]: Starting Load Kernel Module drm...
[   16.405695] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   16.451675] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   16.609317] systemd[1]: Starting Load Kernel Modules...
[   16.704372] systemd[1]: Starting Remount Root and Kernel File Systems...
[   16.745403] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[   16.839448] lp: driver loaded but no devices found
[   16.896793] systemd[1]: Starting udev Coldplug all Devices...
[   16.898592] ppdev: user-space parallel port driver
[   17.032258] systemd[1]: Starting Uncomplicated firewall...
[   17.123752] systemd[1]: Started Journal Service.
[   17.771401] systemd-journald[261]: Received client request to flush runtime journal.
[   17.828378] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[   24.200641] input: MSI WMI hotkeys as /devices/virtual/input/input7
[   24.200743] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   24.200744] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   24.200744] RAPL PMU: hw unit of domain package 2^-14 Joules
[   24.200745] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   24.200745] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   24.712807] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   24.724341] cryptd: max_cpu_qlen set to 1000
[   25.097841] AVX2 version of gcm_enc/dec engaged.
[   25.097842] AES CTR mode by8 optimization enabled
[   25.147572] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   25.149587] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   25.191519] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[   25.191520] fb0: switching to inteldrmfb from VESA VGA
[   25.282514] Console: switching to colour dummy device 80x25
[   25.282595] i915 0000:00:02.0: vgaarb: deactivate vga console
[   25.284261] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   25.284261] [drm] Driver supports precise vblank timestamp query.
[   25.284963] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   25.307140] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[   25.310660] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   25.311025] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   25.312285] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[   25.312354] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
[   25.323171] fbcon: i915drmfb (fb0) is primary device
[   25.339084] Console: switching to colour frame buffer device 240x67
[   25.358879] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[   25.414460] Intel(R) Wireless WiFi driver for Linux
[   25.414461] Copyright(c) 2003- 2015 Intel Corporation
[   25.555848] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[   25.708223] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[   25.708225] iwlwifi 0000:02:00.0: Found debug configuration: 0
[   25.708455] iwlwifi 0000:02:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[   26.178410] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[   26.191660] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   26.192048] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[   26.197682] iwlwifi 0000:02:00.0: base HW address: 08:d4:0c:b1:0d:64
[   26.258038] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   26.258760] thermal thermal_zone5: failed to read out thermal zone (-61)
[   26.286108] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   26.292906] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   26.340397] intel_rapl_common: Found RAPL domain package
[   26.340398] intel_rapl_common: Found RAPL domain core
[   26.340399] intel_rapl_common: Found RAPL domain uncore
[   26.340400] intel_rapl_common: Found RAPL domain dram
[   26.475747] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=3 (0x15/0x1b/0x1a/0x0/0x0) type:speaker
[   26.475748] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   26.475749] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   26.475750] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   26.475751] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   26.475751] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   26.475752] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   26.475753] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   26.555870] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   26.555910] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   26.555964] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   26.556003] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   26.556038] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   26.560042] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   26.560088] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   28.909949] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   30.367572] audit: type=1400 audit(1612683947.368:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=664 comm="apparmor_parser"
[   30.367589] audit: type=1400 audit(1612683947.368:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=664 comm="apparmor_parser"
[   30.367590] audit: type=1400 audit(1612683947.368:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=664 comm="apparmor_parser"
[   30.372709] audit: type=1400 audit(1612683947.376:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=663 comm="apparmor_parser"
[   30.393069] audit: type=1400 audit(1612683947.396:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=683 comm="apparmor_parser"
[   30.530404] audit: type=1400 audit(1612683947.532:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=696 comm="apparmor_parser"
[   30.538043] audit: type=1400 audit(1612683947.540:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=661 comm="apparmor_parser"
[   30.588485] audit: type=1400 audit(1612683947.592:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=700 comm="apparmor_parser"
[   30.611267] audit: type=1400 audit(1612683947.612:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=660 comm="apparmor_parser"
[   30.634081] audit: type=1400 audit(1612683947.636:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=699 comm="apparmor_parser"
[   31.255253] Bluetooth: Core ver 2.22
[   31.255268] NET: Registered protocol family 31
[   31.255268] Bluetooth: HCI device and connection manager initialized
[   31.255272] Bluetooth: HCI socket layer initialized
[   31.255273] Bluetooth: L2CAP socket layer initialized
[   31.255275] Bluetooth: SCO socket layer initialized
[   31.589560] usbcore: registered new interface driver btusb
[   31.603486] Bluetooth: hci0: read Intel version: 370810011003110e00
[   31.680440] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   31.978483] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[   31.995588] Bluetooth: hci0: Intel firmware patch completed and activated
[   34.723067] zram: Added device: zram0
[   34.723162] zram: Added device: zram1
[   34.723236] zram: Added device: zram2
[   34.723339] zram: Added device: zram3
[   35.477644] zram0: detected capacity change from 0 to 1028169728
[   36.004389] Adding 1004068k swap on /dev/zram0.  Priority:5 extents:1 across:1004068k SSFS
[   36.005116] zram1: detected capacity change from 0 to 1028169728
[   36.032436] Adding 1004068k swap on /dev/zram1.  Priority:5 extents:1 across:1004068k SSFS
[   36.033195] zram2: detected capacity change from 0 to 1028169728
[   36.048428] Adding 1004068k swap on /dev/zram2.  Priority:5 extents:1 across:1004068k SSFS
[   36.049316] zram3: detected capacity change from 0 to 1028169728
[   36.076486] Adding 1004068k swap on /dev/zram3.  Priority:5 extents:1 across:1004068k SSFS
[   48.606744] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   48.683967] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   48.685110] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[   51.320898] kauditd_printk_skb: 14 callbacks suppressed
[   51.320899] audit: type=1400 audit(1612683968.324:26): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=908 comm="cups-browsed" capability=23  capname="sys_nice"
[   53.606550] wlp2s0: authenticate with 14:0c:76:a2:9a:61
[   53.610839] wlp2s0: send auth to 14:0c:76:a2:9a:61 (try 1/3)
[   53.613333] wlp2s0: authenticated
[   53.616362] wlp2s0: associate with 14:0c:76:a2:9a:61 (try 1/3)
[   53.624436] wlp2s0: RX AssocResp from 14:0c:76:a2:9a:61 (capab=0x1011 status=0 aid=4)
[   53.627744] wlp2s0: associated
[   53.747150] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready

A côté, mon Windows 10 en dual boot démarre en 5 secondes chrono… Contre 53 secondes pour Ubuntu (ou Xubuntu, 18.04 ou 20.04, le résultat est le même. Snap désactivé).
Merci!

  • # systemd est ton ami

    Posté par  (site web personnel) . Évalué à 6.

    bonjour

    la commande "sudo systemd-analyze blame" va te montrer la liste des services qui prennent le plus de temps à démarrer (par ordre décroissant). Cela te permet de savoir quel service optimiser (si tu veux le conserver) ou supprimer (systemctl disable …).

  • # windows dispose d'un fastboot

    Posté par  . Évalué à 7.

    en gros il n'est pas éteint quand tu demandes l'arrêt de windows,
    il est mis en veille profonde, donc il demarre plis vite car il n'a pas a relancer les programmes, charger la memoire de chacun
    il charge simplement tout depuis son fichier d'hibernation, et tu retrouves le windows dans l'état ou tu l'as laissé (enfin presque)

    mais oui, 53seconde, c'est un peu lent

    dans ce que tu envoies, on voit deja 12 secondes entre le zram3 et le iwlwifi
    4 sec entre iwlwifi et skb

    donc oui, il y a surement des ameliorations à faire

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.